How to flash Meizu U10 5.2.3.0G with SP FlashTool

Unbrick Meizu U10 5.2.3.0G with SP Flash Tool

Here’s a useful tutorial on how you can flash your Meizu U10 5.2.3.0G phone using the SP Flash Tool. This method is not recommended for flashing to the official ROM version, and it will not change the device ID. Use this method to restore bricked device, or to restore forgotten password (select only “userdata” if you need to restore and delete forgotten password).

Flash and unbrick Meizu U10 5.2.3.0G with SP Flash Tool

  1. Download U10-5.2.3.0G-flashtool.7z
  2. Unpack downloaded archive.
  3. Install all required drivers for Meizu U10 phone.
  4. Run flash_tool.exe
    • Pay attention! Do not use “Firmware Upgrade” &  “Format all + Download”, otherwise you’ll get a bricked device.
  5. Remove the check mark against “preloader” and press “Download”.
  6. Connect your tuned off device to PC and wait until you’ll see a round icon with a tick.
  7. That’s it! Disconnect your device from PC and turn it on!

Leave a Reply

Your email address will not be published. Required fields are marked *